QUESTION 151
Which three elements contribute to the bridge ID when configuring RSTP? (Choose three.)
A. designated MAC address
B. priority
C. extended system ID
D. root ID
E. bridge address
Answer: BCE
QUESTION 152
Which LDP message is used to transmit labels and forwarding equivalency class (FEC) information?
A. advertisement
B. discovery
C. notification
D. session
Answer: A
QUESTION 153
You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You have been asked to create a static route that will use 43.18.7.1 as its primary next-hop and 76.13.10.2 as its secondary next-hop. Which command correctly configures this setup?
A. set static route 0/0 76.13.10.2 qualified-next-hop 43.18.7.1 pref 10
B. set static route 0/0 next-hop 43.18.7.1 secondary-next-hop 76.13.10.2 preference 10
C. set static route 0/0 next-hop [76.13.10.2 10.10.10.5] pref 10
D. set static route 0/0 next-hop 43.18.7.1 qualified-next-hop 76.13.10.2 preference 10
Answer: D
QUESTION 136
By default, which Junos routing table stores RSVP egress router information?
A. inet.1
B. inet.2
C. inet.3
D. inet.4
Answer: C
QUESTION 154
You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You have been asked to define an aggregate route for 172.30/16. Which command correctly configures this setup?
A. set summary route 172.30/16
B. set aggregate route 172.30/16
C. set route aggregate 172.30/16
D. set route summary 172.30/16
Answer: B
QUESTION 155
When sending BGP routes in an Update message, how are they grouped?
A. by grouping aggregated address ranges together
B. by using a complete set of matching attributes
C. by the originating autonomous system
D. by the originating router
Answer: B
QUESTION 156
Which two statements are true about MPLS VPNs? (Choose two.)
A. With Layer 3 VPNs, the provider’s routers participate in the customer’s Layer 3 routing.
B. MPLS VPNs are designed to run over private networks rather than the public Internet.
C. With Layer 2 VPNs, the provider does not participate in the routing of the customer’s private IP traffic.
D. MPLS VPN tunnels are always encrypted.
Answer: BD
QUESTION 157
An operator is unable to establish any IS-IS adjacencies on a router in the network. Based on the configuration shown in the exhibit, what is the problem?
interfaces {
ge-0/0/0 {
vlan-tagging;
unit 100 {
vlan-id 100;
family inet {
address 192.168.100.97/30;
}
family iso;
}
unit 200 {
vlan-id 200;
family inet {
address 192.168.100.94/30;
}
family iso;
}
}
fxp0 {
description “MGMT INTERFACE – DO NOT DELETE”;
unit 0 {
family inet {
address 10.210.10.11/27;
}
}
}
lo0 {
unit 0 {
family inet {
address 192.168.100.1/32;
}
family iso {
address 49.1111.1921.6801.0001.00;
}
}
}
}
protocols {
isis {
interface ge-0/0/0.100;
interface ge-0/0/0.200;
}
}
A. Interface lo0 must be configured in the IS-IS hierarchy.
B. Each network interface needs a unique family ISO address.
C. The IS-IS level for an each interface must be specified.
D. The ISO address for interface lo0 is not in hex format.
Answer: A
QUESTION 158
You run the command show interfaces terse ge-1/0/0 and see the output shown in the exhibit. Why are two addresses being shown for this interface?
user@r1> show interfaces terse ge-1/0/0
Interface Admin Link Proto Local Remote
ge-1/0/0 up up
ge-1/0/0.0 up up inet6 fe80::226:88ff:fe02:7481/64
fec0:0:0:2003::1/64
A. Two addresses are assigned in IPv6, one for the physical and one for the logical interface.
B. Two addresses are seen because the loopback address of the router is associated with the interface.
C. The two addresses being seen are the link-local and site-local.
D. An IPv6 address conflict is being seen; verify your interface configuration for problems.
Answer: C
QUESTION 159
Router-X has an external peering session to 10.0.21.2 and several internal peers. How can the policy referenced in the exhibit be used to make sure routes are usable?
[edit]
user@Router-X# show policy-options policy-statement nhs term 1 {
from {
protocol bgp;
neighbor 10.0.21.2;
}
then next-hop self;
}
A. Apply nhs as an import policy to internal BGP peers.
B. Apply nhs as an export policy to internal BGP peers.
C. Apply nhs as an import policy to external BGP peers.
D. Apply nhs as an export policy to external BGP peers.
Answer: B
QUESTION 160
Referring to the exhibit, what will be the IS-IS levels enabled on the interface ge-0/0/0.100?
protocols {
isis {
interface lo0.0;
interface ge-0/0/0.100;
}
}
A. Level 1 only
B. Level 2 only
C. Level 1 and Level 2
D. Level 1, Level 2, and Level 3
Answer: C
If you want to pass Juniper JN0-360 successfully, donot missing to read latest lead2pass Juniper JN0-360 exam questions.
If you can master all lead2pass questions you will able to pass 100% guaranteed.