Free Lead2pass Microsoft 70-417 PDF Dumps With New Update Exam Questions (351-360)

By | December 15, 2014

If you wish to pass 70-417 we highly recommend our demo. Lead2pass is the most credible and authentic source of information on all the available certification exams and we strive to keep our products up-to-date and reliable on a consistent basis.

QUESTION 351
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. The domain contains a standalone server named Server2 that is located in a perimeter network. Both servers run the default installation of Windows Server 2012 R2.

You need to manage Server2 remotely from Server1.
What should you do?

A.    From Server1, run the Enable-PsRemotingcmdlet.
B.    From Server2, run the winrm command.
C.    From Server2/ run the Enable-PsRemotingcmdlet.
D.    From Server1, run the winrm command.

Answer: D

QUESTION 352
You have a server that runs Windows Server 2012 R2.
The disks on the server are configured as shown in the exhibit. (Click the Exhibit button.)

image

You need to create a storage pool that contains Disk 1 and Disk 2.
What should you do first?

A.    Convert Disk 1 and Disk 2 to GPT disks
B.    Create a volume on Disk 2
C.    Convert Disk 1 and Disk 2 to dynamic disks
D.    Delete volume E

Answer: D

QUESTION 353
You have a file server named Server1 that runs Windows Server 2012 R2. Server1 has following hardware configurations:
– 16 GB of RAM
– A single quad-core CPU
– Three network teams that have two network adapters each
You add additional CPUs and RAM to Server1.
You repurpose Server1 as a visualization host.
You install the Hyper-V server role on Server1.
You need to create four external virtual switches in Hyper-V.
Which cmdlet should you run first?

A.    Set-NetAdapter
B.    Add-NetLbfoTeamNic
C.    Add-VMNetworkAdapter
D.    Remove-NetLbfoTeam

Answer: D

QUESTION 354
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
On Server1, an administrator creates a virtual machine named VM1.
A user named User1 is the member of the local Administrators group on Server1.
User1 attempts to modify the settings of VM1 as shown in the following exhibit. (Click the Exhibit button.)

image

You need to ensure that User1 can modify the settings of VM1 by running the Set- Vmcmdlet.
What should you instruct User1 to do?

A.    Run Windows PowerShell with elevated privileges.
B.    Install the Integration Services on VM1.
C.    Modify the membership of the local Hyper-V Administrators group.
D.    Import the Hyper-V module.

Answer: A

QUESTION 355
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. HVServer1 hosts two virtual machines named Server1 and Server2. Both virtual machines connect to a virtual switch named Switch1.
On Server2, you install a network monitoring application named App1.
You need to capture all of the inbound and outbound traffic to Server1 by using App1.
Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the solution. Choose two.)

A.    Get-VM "Server2" | Set-VMNetworkAdapter -IovWeight 1
B.    Get-VM "Server1" | Set-VMNetworkAdapter -Allow/Teaming On
C.    Get-VM "Server1" | Set-VMNetworkAdapter -PortMirroring Source
D.    Get-VM "Server2" | Set-VMNetworkAdapter -PortMirroring Destination
E.    Get-VM "Server1" | Set-VMNetworkAdapter -IovWeight 0
F.    Get-VM "Server2" | Set-VMNetworkAdapter-AllowTeaming On

Answer: CD

QUESTION 356
Your network contains two Hyper-V hosts named Host1 and Host2. Host1 contains a virtual machine named VM1. Host2 contains a virtual machine named VM2. VM1 and VM2 run Windows Server 2012 R2.
You install the Network Load Balancing feature on VM1 and VM2.
You need to ensure that the virtual machines are configured to support Network Load Balancing (NLB).
Which virtual machine settings should you configure on VM1 and VM2?

A.    DHCP guard
B.    MAC address
C.    Router guard
D.    Port mirroring

Answer: B

QUESTION 357
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit.
(Click the Exhibit button.)

image

You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention. The solution must prevent data loss.
Which settings should you modify?

A.    BIOS
B.    Automatic Stop Action
C.    Automatic Start Action
D.    Integration Services

Answer: B

QUESTION 358
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server 1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
You create an external virtual switch named Switch1. Switch1 has the following configurations:
– Connection type: External network
– Single-root I/O virtualization (SR-IOV): Enabled
Ten virtual machines connect to Switch1.
You need to ensure that all of the virtual machines that connect to Switch1 are isolated from the external network and can connect to each other only. The solution must minimize network downtime for the virtual machines.
What should you do?

A.    Remove Switch1 and recreate Switch1 as an internal network.
B.    Change the Connection type of Switch1 to Private network.
C.    Change the Connection type of Switch1 to Internal network.
D.    Remove Switch1 and recreate Switch1 as a private network.

Answer: B

QUESTION 359
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. The domain contains a virtual machine named VM1.
A developer wants to attach a debugger to VM1.
You need to ensure that the developer can connect to VM1 by using a named pipe.
Which virtual machine setting should you configure?

A.    BIOS
B.    Network Adapter
C.    COM 1
D.    Processor

Answer: C

QUESTION 360
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has three physical network adapters named NIC1, NIC2, and NIC3.
On Server1, you create a NIC team named Team1 by using NIC1 and NIC2. You configure Team1 to accept network traffic on VLAN 10.
You need to ensure that Server1 can accept network traffic on VLAN 10 and VLAN 11. The solution must ensure that the network traffic can be received on both VLANs if a network adapter fails.
What should you do?

A.    From Server Manager, change the load balancing mode of Team1.
B.    Run the New-NetLbfoTeamcmdlet.
C.    From Server Manager, add an interface to Team1.
D.    Run the Add-NetLbfoTeamMembercmdlet.

Answer: C

You can prepare for any certification of your choice with the ultimate preparation source that we have to offer!Are you thinking this can’t be true? Well, it is! Our Lead2pass software is now at your service to act as a guide in helping you pass 70-417. Now get that necessary competitive edge that comes with preparing with the help of Lead2pass software the fastest emerging IT certifications provider.

www.lead2pass.com/70-417.html