[Full Version] Dumps For Exam 700-703 With New Updated Exam Questions (31-40)

By | December 16, 2016

2016 December Cisco Official New Released 700-703 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Since I recently passed the the Cisco 700-703 exam, it’s time for me to share the Lead2pass exam dumps I used when preparing for this exam.

Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/700-703.html

To which layer of the OSI model would the ACI conceptsof policy, AEPand physical and VMMdomains?

A.    Physical
B.    Data link
C.    Network
D.    Transport
E.    Presentation
F.    Application
G.    session

Answer: B
An override policy at AEP can be used to specify a different physical interface policy for a VMM domain. This policy is useful in scenarios where a hypervisor is connected to the leaf switch through an intermediate Layer 2 node, and a different policy is desired at the leaf switch and hypervisor physical ports. For example, you can configure LACP between a leaf switch and a Layer 2 node. At the same time, you can disable LACP between the hypervisor and the Layer 2 switch by disabling LACP under the AEP override policy.
The layer 2 is Data link layer

Which in an ACI fabric can configure vPCs?

A.    Tenant administrator
B.    Serveradminister
C.    Network administrator
D.    Infrastructureadministrator

Answer: D
In ACI, the logic to define a virtual Port-Channel is as follows:
The infrastructure administrator creates the VPC domain from the "Access Policies" as "protection" policy (i.e. which "nodes" are part of a vPC domain) The infrastructure administrator defines the "Access Policy Group" "Bundle Interfaces" where one creates the specific vPC channel-group configuration The interface policy defines a list of interfaces that are associated with the vPC channel-group but it doesn’t specify which leafs this is associated with The switch policy defines a list of "nodes" nodes whose interfaces selected by the interface policy are defined as part of the vPC

What does the ACI fabric use to identify the location of an endpoint?

A.    VTEP address
B.    COOP database
C.    leaf MAC table
D.    endpointIP address

Answer: A
The ACI fabric decouples the tenant endpoint address, its identifier, from the location of the endpoint that is defined by its locator or VXLAN tunnel endpoint (VTEP) address.
The following figure shows decoupled identity and location.  http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundam`entals/b_ACI-Fundamentals/b_ACI_Fundamentals_BigBook_chapter_0100.html

In an ACI fabric what is equivalent to a VRF that separatesroutinginstancesand can be used for administrativeseparation?

A.    Private network (Layer 3)
B.    Layer 2 through layer 7 network policiesof the application
C.    Endpoint group
D.    Tenant
E.    contract

Answer: A
Private-L3 – Equivalent to a VRF, separates routing instances, can be used as an admin separation
http://www.cisco.com/assets/global/SI/events/cisco_datacenter_day/pdf/Policy_ Defined-DC-ACI_Slovenija.pdf

Which logical representation of policies between endpoint groups in application-centric infrastructure isprovidedby one EPG andconsumedby another?

A.    VLAN
B.    private network (Layer 3)
C.    endpoint group
D.    tenant
E.    contract

Answer: E

What is the VXLAN source groupfield used for in an ACI fabric?

A.    to distribute bridge domain information in the fabric
B.    to identity IP subnets that are required for each application function
C.    to identifyspecific endpoints for each application function
D.    to enable VMM repotting of virtual machine creation to the fabric

Answer: C
VXLAN Source Group is used as a tag/label to identify the specific end pointofeach application function (EPG)

Where in the APIC GUI are Layer 2 and Layer 3 networkscreated?

A.    VM Networking > inventory
B.    Fabric > Access policies
C.    VM networking > policies
D.    Tenants >Tenant_Name

Answer: B
On the menu bar, choose FABRIC > Access Policies. http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/mapping/mapping_gd/layer2_examples.html

Which two new operational modelsare driving the need for infrastructurechange in business today?(Choose two)

A.    Big data
B.    Increased time to market
C.    Increased data center costs
D.    Cloud computing
E.    Increasing IT staff

Answer: AD

Which protocols are used to resolve hypervisor-to-leaf node attachment in an ACI fabric?

A.    COOP or OpFlex
B.    LLDP or COOP
C.    LLDP or OpFlex
D.    LACP or OpFlex

Answer: C
LLDP or OpFlex permissions are used to resolve the hypervisor to leaf node attachments.

Which option lists the endpoint groups that are supported in an ACIfabric?

A.    Bridge domain, VTEPs, IP subnets, virtual ports, and physical ports.
B.    Bridge domain, VMM, virtual ports, VXLAN, and NVGRE.
C.    VLANs, IP subnets, physical ports, VXLAN, and NVGRE.
D.    VLANs, virtual ports, physical ports, VXLAN,and NVGRE.

Answer: D
Endpoint groups (EPGs) group servers or services with similar policy requirements. For example, SharePoint has three tiers that require different behavior on the network: web, application, and database. All SharePoint database servers belong to the same database EPG. Each device inside of an EPG is an individual endpoint. There are several ways to group endpoints to EPGs, which include identifiers like VLAN, VXLAN, and NVGRE tags; physical ports or leaves; and virtual ports using VMware integration. Each EPG is associated to one bridge domain, which should contain the default gateways required by all endpoints in the group.

I hope Lead2pass exam questions from the Cisco 700-703 exam helps you pass the exam and earn your Cisco certification! Happy Studying!

700-703 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDYTY0MXc2WnZTVVU

2016 Cisco 700-703 exam dumps (All 55 Q&As) from Lead2pass:

http://www.lead2pass.com/700-703.html [100% Exam Pass Guaranteed]